Leaking Heart Valves In The Elderly

Dear skaters and skaters

Welcome to



Here's everything about skating, such as the equipment, tips, career skaters, hardcore skaters and Rigger skaters, skate style's tricks and much more ... enough said, have fun with my blog and recommends further me. Thanks

The equipment

Let's start with the equipment on so we first need to skate:

first The Board

the board is the heart of the skateboard, and is made of wood. I drive the moment a blank deck board is it just because nothing on the deck is like a pattern, signs, etc. (the bottom deck is registered). They cost between 20 and 30 euros and are perfect for people who often times need a new board (and I). But there are many different types of boards such as the pool boards, long boards and old school boards. Here are 4 pictures of a normal skateboard, a pool board a long board and an old-school board:

second The axes

The front and rear axles are in the middle of the board screwed. They shall be kept as the wheels and they used to grind (more on that later). In the two axes are each second Bushings (Bushings) The draw for da are (the harder to steer the steering harder rubber). throughout the axis and through the Bushings is the so-called "Kingpin" by (the Kingpin's just a screw) keep all parts of the axle firmly together. By the turn solid Kingpins is harder the axis, by a slight turn, the axis weicher.Unter the two axes is the so-called "Riserpads" is a kind of small rubber mat and it is there that the axis of the Board, a perfect anpasst.Hier Picture this:


third The rollers (wheels) and the ball bearing

The roles are to roll because there thick and thin, small and large roles and all are suitable for what other small roles for the Skate Park Street and thought styles (more on that later). Large rollers are more for the skate style designed pool (more on that later). In the roles are so called ball bearings in it (in any role 2), it approximately 1.5 cm wide and about 7mm wide disks are being pushed by the rollers on the axles and are secured with a nut. Ball bearings are available in various designs, the speed are measured in "ABEC" is bearing with the execution speed ABEC 1, 3, 5, 7, 9, I recommend beginners ABEC 3 or 5, I'm going right now with ABEC 7th Here is a picture of rolls (for the skate-style swimming pool) and ball bearings (ABEC 5)