Leaking Heart Valves In The Elderly

Dear skaters and skaters

Welcome to



Here's everything about skating, such as the equipment, tips, career skaters, hardcore skaters and Rigger skaters, skate style's tricks and much more ... enough said, have fun with my blog and recommends further me. Thanks

The equipment

Let's start with the equipment on so we first need to skate:

first The Board

the board is the heart of the skateboard, and is made of wood. I drive the moment a blank deck board is it just because nothing on the deck is like a pattern, signs, etc. (the bottom deck is registered). They cost between 20 and 30 euros and are perfect for people who often times need a new board (and I). But there are many different types of boards such as the pool boards, long boards and old school boards. Here are 4 pictures of a normal skateboard, a pool board a long board and an old-school board:

second The axes

The front and rear axles are in the middle of the board screwed. They shall be kept as the wheels and they used to grind (more on that later). In the two axes are each second Bushings (Bushings) The draw for da are (the harder to steer the steering harder rubber). throughout the axis and through the Bushings is the so-called "Kingpin" by (the Kingpin's just a screw) keep all parts of the axle firmly together. By the turn solid Kingpins is harder the axis, by a slight turn, the axis weicher.Unter the two axes is the so-called "Riserpads" is a kind of small rubber mat and it is there that the axis of the Board, a perfect anpasst.Hier Picture this:


third The rollers (wheels) and the ball bearing

The roles are to roll because there thick and thin, small and large roles and all are suitable for what other small roles for the Skate Park Street and thought styles (more on that later). Large rollers are more for the skate style designed pool (more on that later). In the roles are so called ball bearings in it (in any role 2), it approximately 1.5 cm wide and about 7mm wide disks are being pushed by the rollers on the axles and are secured with a nut. Ball bearings are available in various designs, the speed are measured in "ABEC" is bearing with the execution speed ABEC 1, 3, 5, 7, 9, I recommend beginners ABEC 3 or 5, I'm going right now with ABEC 7th Here is a picture of rolls (for the skate-style swimming pool) and ball bearings (ABEC 5)

How To Seal Custom Bathtub

2.Übung makes perfect

If you can drive well, try an "Ollie" from. It is the simplest and the basic trick while skating, he looks like this:



If you've practiced this and managed to try it just to drive down from ramps (first the small ones). I recommend you first "bank's" down down, since they are the easiest to moving ramps, there is. You see something like this:


Once you made it a "bank" down to repeatedly drive it a few times and dares you to a "quarterback" that looks like this:


! But beware! There is a trick to pass this ramp we call it "drop" and works as follows:



if it creates all this and do it well, can you be ready for step 3


third I am the hero of the strawberry field work

If the first two steps well, you ran to higher platforms or dare try it with other ramps like a

"Half-Pipe"

It is the "drop" and intended for "Lip-tricks". The "lip-tricks" we come to that later.

"fun box"

The "fun box" as the name suggests, makes pretty much fun. It is easy to think about it go and can be varied tricks. Even this I will write more later.

"Jump Box"

The "Jump Box" is to jump over it as the name says. Tricks are in addition also later.

"Kicker"

The "kicker" is to leap to the thought and can be varied with different tricks.
So, that's it is now with the beginner's stage to's Canned

Microsoft Usb Lifecam Web Camera Driver

The different types of skateboarding

There are 3 different types of skateboard and I will take you to every 3 mind lead. Let's start with the career-skaters.

first Career Skater

The career skaters are probably the most famous skater in the world, take on "Contests" (skate competitions) and part swimming in money. The most famous and successful career-skater Tony Hawk is the world (nicknamed "Birdman"). He participated in 103 contests and 73 times was first and 19 times 2. He drives the half pipe and skate-style park (more on that later) and is now retired and moderated only skate Events.Tony Hawk was the first skater was named after a shoe model, and he invented 85 new skateboard tricks. Here's a video of him




2.Hardcore skaters

The Hardcore skaters skate in any place where it is forbidden. Make amazing leaps and very dangerous things. Bam Margera and Mike Valley are probably the most famous Hardcore skaters of the world most of you will know from the Bam Margera on MTV broadcasts Viva la Bam and Jackass. Both are by nature quite aggressive and upset drive the Skate-Style Street (more on that later) and excellent skateboarding, as this video proves here:




third Rigger skaters

Rigger skaters are skaters from the old stuff some new crafts to skate on something called "spots". The most famous rigger is a high probability of Jeff King, he even has his own show called the "Built to Shred" with. For Rigger the whole world a skate park and go often to the skate-style: Street (more on that later). Here's a video of Jeff King: come



In the next few days some new posts your groove